-
Pros-Aide II Adhesive
$11.00 - $101.30Pros-Aide® II was developed to help eliminate the difficulty of removing Pros-Aide®“The Original” from the skin. Pros-Aide® II is very similar to “The Original” in all characteristics except that... -
Pros-Aide Original Adhesive
$9.60 - $89.30The “original” water-based adhesive for the skin. It adheres for long periods without irritation. Pros-Aide® is the leading adhesive used for medical prosthetic applications. Pros-Aide® is the... -
Pros-Aide No-Tack
$23.30 - $116.50All the great properties of “The Original” Pros-Aide® but with less residual tackiness. Pros-Aide® No-Tack is used just like Pros-Aide® for producing PAX paint™ but has significantly reduced... -
Pros-Aide Remover
$7.50 - $25.50A special remover/cleaner for Pros-Aide® and PAX paint. It is formulated from ingredients that allow for safe removal of Pros-Aide®, PAX Paint and other make-up from the skin. Removal: Shake... -
Pros-Aide Go Kit
$59.70Everything you need...at your fingertips. The Pros-Aide Go Kit.Each kit includes: 1 oz. Pros-Aide "The Original" 1 oz. Pros-Aide II "The Sequel" 1 oz. Pros-Aide "No Tack" 1 oz. Pros-Aide "Aquacream...
Description
Pros-Aide is a contact adhesive: When an adhesive is a contact this means it adheres to itself, taking along whatever it is attached to. To use a contact adhesive you simply apply even coats of the adhesive to each material you wish to adhere, allow it to dry, and stick them together.
Paint a thin coat of the adhesive over the back (inside) area of the prosthetic and let dry -- it dries clear. Be careful not to let it fold over onto itself, because pros-aide is VERY sticky and will stick to itself. Once you have painted it on the back of the prosthetic, also paint a thin coat over the area where the appliance is to be placed and let it start to dry. Once both are mostly dry, firmly press together.
Removal:
Using Pros-Aide Remover, find a spot where the appliance has started to lift a bit. Work the remover in under the appliance with a brush or swab. Continue applying remover to this area and easing the appliance off. Do not pull too hard or rip off the appliance. Let Pros-Aide Remover do its job; your appliance and performer will be happier for it. Skin can then be cleaned with a good cleanser. Follow with a light moisturizer to calm skin.
This adhesive has been determined to be safe for skin and nasal mucosa.
Available in 0.5 oz. and 6 oz. Made by Pros-Aide®, a division of ADM Tronics.
Pros-Aide and latex products being shipped during cold weather months have the potential to freeze and then will turn solid. To help avoid this, we suggest shipment via 2nd day or next day service from approximately November through April. However, ordering during these cold weather months is at your own risk and Norcostco will not be responsible for product that has been ruined due to freezing during shipment. These products are stocked at all of our locations and, of course, are available to be picked up.
- A thick Pros-Aide® adhesive excellent for filling in seams or gaps in appliances and also great for repairs.
- Pros-Aide® Cream Adhesive does not contain any artificial fillers to make it thick yet has the properties of Pros-Aide® at heavy viscosity.
- Pros-Aide® Cream Adhesive can be easily colored to make thick PAX Paint ™ for use as a filler.
- Pros-Aide® Cream Adhesive can also be used to create scars or textures in molds or directly on the skin.
Pros-Aide is a contact adhesive: When an adhesive is a contact this means it adheres to itself, taking along whatever it is attached to. To use a contact adhesive you simply apply even coats of the adhesive to each material you wish to adhere, allow it to dry, and stick them together.
Paint a thin coat of the adhesive over the back (inside) area of the prosthetic and let dry -- it dries clear. Be careful not to let it fold over onto itself, because pros-aide is VERY sticky and will stick to itself. Once you have painted it on the back of the prosthetic, also paint a thin coat over the area where the appliance is to be placed and let it start to dry. Once both are mostly dry, firmly press together.
Removal:
Using Pros-Aide Remover, find a spot where the appliance has started to lift a bit. Work the remover in under the appliance with a brush or swab. Continue applying remover to this area and easing the appliance off. Do not pull too hard or rip off the appliance. Let Pros-Aide Remover do its job; your appliance and performer will be happier for it. Skin can then be cleaned with a good cleanser. Follow with a light moisturizer to calm skin.
This adhesive has been determined to be safe for skin and nasal mucosa.
Available in 0.5 oz. and 6 oz. Made by Pros-Aide®, a division of ADM Tronics.
Pros-Aide and latex products being shipped during cold weather months have the potential to freeze and then will turn solid. To help avoid this, we suggest shipment via 2nd day or next day service from approximately November through April. However, ordering during these cold weather months is at your own risk and Norcostco will not be responsible for product that has been ruined due to freezing during shipment. These products are stocked at all of our locations and, of course, are available to be picked up.