-
Iwata Neo CN - Replacement Nozzle 0.35mm
Inc. TaxInc. TaxRRP: Inc. Tax$17.00RRP:Replacement 0.35mm Nozzle for the NEO CN Gravity-Feed Dual-Action Airbrush Gun made for Iwata.Part #3 in diagram. -
Iwata Eclipse Series - Replacement Needle BS 0.35mm
Inc. TaxInc. TaxRRP: Inc. Tax$12.75RRP:Replacement 0.35mm Needle for the Eclipse Series HP-BS Gravity Feed Airbrush Gun made by Iwata. Iwata needles are made of precision ground and hardened stainless steel that will withstand prolonged... -
Iwata Neo Series - Replacement Needle Cap
Inc. TaxInc. TaxRRP: Inc. Tax$7.75RRP:Replacement Needle Cap for the NEO BCN Siphon-Feed Dual-Action and the NEO CN Gravity-Feed Airbrush Guns made for Iwata.Part #1 in diagram. -
Iwata Neo BCN - Replacement Needle 0.5mm
Inc. TaxInc. TaxRRP: Inc. Tax$7.75RRP:Replacement 0.5mm Needle for the NEO BCN Siphon-Feed Dual-Action Airbrush Gun made for Iwata. Iwata needles are made of precision ground and hardened stainless steel that will withstand prolonged... -
Iwata Replacement Needle Packing Screw
Inc. TaxInc. TaxRRP: Inc. Tax$12.75RRP:An airbrush is only a true Iwata when it contains genuine Iwata parts. To keep your airbrush operating at peak performance, make sure the model number on the side of your airbrush is listed below...
Description
Replacement 0.35mm Needle for the NEO CN Gravity-Feed Dual-Action Airbrush Gun made for Iwata.
Iwata needles are made of precision ground and hardened stainless steel that will withstand prolonged usage. They are, however, subject to easy physical damage because of the long tapered, extremely fine tip. If the needle point becomes severely bent, it must be straightened before pulling it back through the nozzle. If not, the bent needle might damage the nozzle as its pulled through.
Part #10 in diagram.
Iwata needles are made of precision ground and hardened stainless steel that will withstand prolonged usage. They are, however, subject to easy physical damage because of the long tapered, extremely fine tip. If the needle point becomes severely bent, it must be straightened before pulling it back through the nozzle. If not, the bent needle might damage the nozzle as its pulled through.
Part #10 in diagram.