REPLICATE REALITY WITH EASY SET ALGINATES!
The brand new warm water set, Prosthetic Grade Alginates, Monster Gel™ CSF and Monster Gel™ TG, mix easily to very creamy consistencies by hand.
Monster Gel™ CSF (Crystalline Silica Free) comes in 3 different working times: Fast, Regular, and Slow. Both grades work with warm water at 90F. Great for head casts and body casting. Working time is dependent on which grade you’ve chosen. (Please note that these alginate should not be used with cold water. They are formulated to work with warm to very warm water. Cold water mixes can result in very slow and weak setting batches.)
Monster Gel™ TG (Traditional Grade) gives you approximately 4-5 minutes working time at 85 F.
For optimal results, use warm water only
WARNING: Monster Gel™ TG Contains CRYSTALLINE SILICA.
Prolonged or repeated exposure by inhalation of crystalline silica may cause lung damage and Silicosis. Wear respiratory protection when using this product: Do not breathe dust. Protective gloves and safety glasses or goggles. If exposed or concerned: Get medical advice. Dispose of contents/ containers in accordance with local regulation.
| Monster Gel™ Prosthetic Alginate Comparison Chart | |||||
|
Product |
Working Time (@ ~90°F) | Set Time | Water Temp Range | Key Features | Recommended Use |
| Monster Gel™ CSF – Fast | ~1.5–2 min | ~3 min | Warm to Very Warm (90°F) | Crystalline Silica Free. Ideal for quick casts. | Small area lifecasts, fast setups |
| Monster Gel™ CSF – Regular | ~3 min | ~4–5 min | Warm to Very Warm (90°F) | Balanced speed and detail. Silica-free for safer handling. | Faces, hands, partial body casts |
| Monster Gel™ CSF – Slow | ~5 min | ~6–7 min | Warm to Very Warm (90°F) | Longer working time for complex lifecasts. Silica-free. | Full head and torso casting |
| Monster Gel™ TG (Traditional Grade) | ~4–5 min | ~6–8 min | 85°F recommended | Traditional alginate with crystalline silica. Smooth, reliable performance. | Standard head or body lifecasts |
Key Notes
-
CSF Grades are Crystalline Silica Free, making them safer for artists and models alike.
-
Always mix with warm to very warm water. Cold water will prevent proper setting.
-
Set and working times vary slightly depending on ambient temperature and water conditions.
-
For maximum accuracy, cast immediately after alginate has set.
Frequently Asked Questions (FAQs)
Q: What is Monster Gel used for?
A: Monster Gel is a professional-grade prosthetic alginate used for lifecasting applications, such as face, hand, or body molds. It’s ideal for capturing fine detail safely and comfortably on the skin.
Q: How do I mix Monster Gel?
A: Mix the alginate powder with clean, cold water using a 1:1 volume ratio (or per instructions on the package). Stir quickly to a smooth, creamy consistency and apply immediately, as working time is limited.
Q: How long does it take to set?
A: Setting time depends on temperature, but generally ranges from 3 to 8 minutes. Using colder water can slow the set time; warmer water speeds it up.
Q: Is Monster Gel skin-safe?
A: Yes. Monster Gel is formulated to be gentle on the skin, making it suitable for use on the face and other sensitive areas. However, avoid use on broken or irritated skin.
Q: What makes Monster Gel different from other alginates?
A: Monster Gel is designed specifically for prosthetic-grade lifecasting, offering superior tear strength, detail reproduction, and flexibility compared to dental or hobby-grade alginates.
Q: Can I reuse Monster Gel molds?
A: No. Like all alginates, Monster Gel molds are single-use only and should be cast immediately with a suitable material like plaster or stone.
Q: How should I store Monster Gel powder?
A: Keep the powder sealed, dry, and stored in a cool location to avoid clumping and degradation. Avoid exposure to humidity.
Q: Is this product dust-free or low-dust?
A: While not certified “dust-free,” Monster Gel is low-dust and designed for studio safety. Always mix in a well-ventilated area and wear a dust mask as a precaution.
Q: Can I extend working time?
A: Yes. Use cooler water to increase your working time. Adding retarder is not recommended, as it may interfere with setting consistency.
